Musicam Roadrunner Manual do Utilizador descarregar pdf (Página 22)

CDQPrima USERS GUIDE

6-226-22

output levels are useful when connecting your CDQPrima to consumer

grade audio equipment.

When changing the input clip level, the encoder VU meter calibration

(Models 120, 220 and 230) corresponds to the selected input clip level,

that is, the ‘0’ dB LED corresponds to the maximum level selected.

Regardless of the decoder clip level selected, the decoder VU meter ‘0’

dB LED always corresponds to +18 dBu.

6.2 Get Connected

Once configured, all that is left is to connect to another user. If you will

be receiving the calls, you need to do nothing else. Your CDQPrima is

set from the factory to answer all incoming calls. However, this auto-

answer feature can be turned off as discussed in Chapter 5.

6.2.1 Manual Dialing (Internal Terminal Adapter Only)

Once configured, either manually or using quick-configurations, you

are now ready to dial into another codec.

Dialing is easy. Press the DIAL button. Move the cursor to the line you

want to dial, press ENTER. Select the bit rate, either 56 or 64,

corresponding to the selected encoder bit rate, press ENTER and enter

the phone number, up to 24 digits/characters, pressing ENTER when

done. To dial additional lines, follow this procedure, selecting the

desired line. To summarize:

For two-line connections:

DIAL

select line

ENTER

select bit rate (must be same base rate as encoder)

ENTER

enter phone number 1

ENTER

DIAL

select line

ENTER

select bit rate (must be same base rate as encoder)

ENTER

enter phone number 2

ENTER

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Sem comentários

Musicam Roadrunner Manual do Utilizador Página 22